KEN IWD 2314

Extra-spacious machine with limited outer measurements

KEN IWD 2314 is identical with IWD 2311, but with its extra 4 cm of depth it is also possible to wash and disinfect autoclave baskets and instrument containers at, for example, sterile centres. The machine is available both as a pass-through machine and with one door. The pass-through model ensures effective separation of an unclean and clean side, thus optimising the level of hygiene and reducing the risk of hospital infections. The machine is elegant and clean-lined Danish design.

KEN IWD 2314 can wash at up to 4 levels and, with its extra 4 cm of depth and large range of flexible equipment, it is a good choice for disinfecting washes at e.g. surgical wards, clinics for out-patients and sterile centres.

Advantages

User-friendly control panel ensures correct operation
Programme information etc. is shown in the display in plain language
Individual programme selection possible. Four programme positions are standard
Process Indication Bar shows how far the programme has come
Double monitoring of temperature
(EN/ISO 15883)
Possible selection of intelligent, maintenance-free drying module
Possible connection of up to 4 types of chemicals - 2 as standard
Able to have printer connected for optimum process documentation
Lockable lower compartment for keeping chemicals - up to 4 x 5 l containers
Thermo glassdoor as standard

Find out more

Specifications

Power connection (standard)	3 x 400 V,N,J, 50Hz
Connected load/initial fuse	10kW/16A
Water connection	Cold untreated water: 1 pcs., ¾” RG, 5-30 gr.C, 0-30 gr.dH
Water connection	Hot soft water: 1 pcs., ¾” RG, 30-70 gr.C, 0-3 gr.dH
Water connection	Demin. water: (Extra) 1 pcs., ¾” RG 5-70 gr.C
Water pressure	200-800 kPa
Outlet valve	Ø 50
Amount of water (approx.) per intake	13-14 l
Ventilation (if supplied with drying module)	Ø 70, 100 m3/time
Drying module	HEPA filter class S, 5000 - 6000 hours life cycle
Washing arms	Washing arms are detachable and can be disassembled for cleaning
Pump capacity	370 l/min.
Free depth 2 doors	620 mm
Free depth 1 door	630 mm
Free width without central level	510 mm
Noise level	approx. 59-64 dBa (sound pressure)
Sealing class	IP 21 (not scavenging-proof)
Steel Quality	Stainless steel quality AISI 316

Service

The machine has built-in KEN Quality control for optimum reliability. It demands a quality assurance check every 24 hours as well as servicing after 2,500 washes. The construction is service-friendly, with easy access to all components. All KEN machines conform to present EU Directives, and all hospital machines have been constructed on the basis of EN ISO 15883, including, for example, the testing of its cleaning capacity according to SIS-TR 3:2001 (formerly SPRI).
You can also read bout KEN´s Internet-based Quality assurance concept at www.kvalitetssikring.net.
In addition, KEN offers subsequent Hospital service on tel. +45 70 10 20 92:

Preventive maintencance
Service subscription or Total Service
Quick emergency service in the event of shutdown

Accessories

Below are examples of accessories/equipment for this machine. Look for equipment with the aid of the equipment selector below, or contact KEN for information about further possible equipment, including customised special solutions.